What is the Chinese equivalent of NiCr 40/20 or Ni40Cr20?

GB Cr20Ni35. NiCr 40/20 has Ni ≥37.0%, Cr 18–22%, Si 1.8–3.0% and resistivity ≈1.05 μΩ·m; GB Cr20Ni35 has Ni 34.0–37.0%, Cr 18.0–21.0%, Si 1.00–3.00% and resistivity 1.04 μΩ·m. The two overlap across the composition range.

Is there a grade called Cr20Ni40 in the Chinese standard?

No. GB/T 1234 does not define Cr20Ni40. Some Chinese suppliers use it as a commercial name, but the standardised grade is Cr20Ni35.

Does NiCr 40/20 have an ASTM or DIN number?

No. It has no ASTM, UNS, Werkstoff or DIN designation — it is an industry trade grade.

Can NiCr 40/20 be used in a sulphur-bearing atmosphere?

No. All nickel-chromium grades are unsuitable in sulphur atmospheres. Use FeCrAl instead.

Home › Products › Pure Nickel Wire (Ni200 / Ni201 / N4 / N6)

Pure Nickel Wire (Ni200 / Ni201 / N4 / N6)

Short answer: we supply pure nickel wire in Ni200, Ni201, N4 and N6, diameter φ0.03 - φ10 mm, bright annealed, in coils or straight-cut lengths.

Wire, rod or straight-cut — worth agreeing in writing
In the trade, round pure nickel up to about φ8 mm is normally called wire, and above that rod. We can produce up to φ10 mm as drawn and straightened wire, but if your drawing says "φ20 mm wire" that is physically a rod (about 2.8 kg per metre) and nobody can supply it as wire. If the distinction matters on your drawing, lock it down at enquiry stage — it costs nothing now and prevents a delivery dispute later.

1. Grades

Grade	Ni %	C %	ρ20 (μΩ·m)	Note
Ni200	≥99.6	≤0.15	0.096	Standard commercial pure nickel
Ni201	≥99.0	≤0.02	0.096	Low carbon, for elevated-temperature service
N4	≥99.9	-	0.096	Chinese high-purity designation
N6	≥99.5	-	0.096	Chinese general-purpose designation

Ni200 and Ni201 differ mainly in carbon content, which governs how the material behaves above about 300 °C. For electrochemical or battery work at moderate temperature, Ni200 is the usual choice. For higher-temperature or welded assemblies, ask for Ni201.

2. Size range and tolerance

Item	Range	Tolerance
Diameter	φ0.03 - 10 mm 0.0012" - 0.394"	±0.002 mm (fine) ±0.02 mm (<1 mm) ±0.03 mm (1-3 mm) ±0.08 mm (>3 mm)
Straight-cut length	up to 3,000 mm up to 118"	±2 mm
Straightness (straight-cut)	-	≤3 mm per metre
Coil	spool or coil	to your spool weight
Condition	-	Annealed soft / half-hard
Surface	-	Bright, no scale, no scratches

3. Weight reference

Diameter	Weight per metre	Weight per 1,000 mm straight length
φ1.0 mm	6.98 g/m	6.98 g
φ3.0 mm	62.8 g/m	62.8 g
φ5.0 mm	175 g/m	175 g
φ10.0 mm	699 g/m	699 g

Basis: density 8.9 g/cm³. For a 1 m straight-cut at φ10 mm expect roughly 0.7 kg per piece.

4. Typical applications

Battery tabs, busbars and connection strips (strip form is more usual — see our pure nickel strip page)
Electronic component leads and pins
Vacuum devices and electron tubes
Electrodes and current collectors in electrochemical cells
Corrosion-resistant wire for chemical plant
Thermocouple and compensation lead conductors

5. Please confirm these 4 points before ordering

Grade — Ni200 or Ni201. If your application is electrochemical and runs below 300 °C, Ni200 is normally sufficient.
Form — coil, spool or straight-cut. Straight-cut adds a straightening operation and a length tolerance.
Diameter and tolerance — and whether the tolerance is point-to-point or a lot average.
Certificate — state up front whether you need a mill certificate with composition per heat number. We issue it as standard, but say so on the enquiry and it goes into the quotation.

Need a quotation?

Send grade, form, size with tolerance and quantity — we reply within one working day (GMT+8).

WhatsApp +86 180 6103 5177 Enquiry form

About Taizhou Aolante Alloy

Taizhou Aolante Alloy Materials Co., Ltd. was founded in 2010 and is a source manufacturer of electric heating alloys and nickel-based precision alloys. Production base in Taixing, Taizhou, Jiangsu, approximately 20,000 m², 48+ pieces of melting, forging, rolling, drawing, heat-treatment and testing equipment, 200+ staff, annual capacity about 7,500 tonnes.

Contact: Tel +86 180 6103 5177 / +86 523 8751 8610 | Email althjcl@126.com

Grade cross-references are commercial equivalents, not a guarantee of interchangeability. Final acceptance is subject to the composition sheet agreed at order.